what do you use

beginner-James

Mac-Valve Maestro!
I'm searching for a good source for texture stencil/scotch bright

I have scotch bright BUT it's to new and thick what do you do to break it in, I've tried to pull it apart but it's still to thick. I have bought a FX stencil not tried it yet!! (Iwata-Medea Artool Freehand Airbrush Templates, Texture Fx Mini Series ) this was around £15.00. I have tried to find florist webbing/paper but unable to find any I've see this used by Airbrush Academy in a video but as I've said I'm unable to source it IF ANYONE has some could I buy some from you.

I also have the usual Scalpel's and blades euro scratch set (3 brushes, Wire, copper Wire and fibre glass) so what else can I use
Beginner-James
 
I found the same with scotch brite being too thick. I ended up cutting it in half carefully with a razor blade and it seemed to do the trick.
The texture fx stencils I use all the time and they're fantastic.
Try a Fibre-glass pencil for texturing. I'm loving the effects you can get with one of them.
 
Dryer sheet.
It Can be used as is or if you want greater detail then Hand wash a dozen or so in warm water - no detergent required. Peg them somewhere to dry the iron them flat.

Remay is Mr.microns weapon of choice.
 
Here's a small list of things I use for textures

1.erasers of all sizes and makes both pencils and square.
2 Dryer sheets
3. Electric eraser.
4. Onion sack, (makes great scale pattern for lures)
5.shower scruber.
6. Different types of netting.
7. A wadded up piece of plastic bag
8 5 mil fiberglass eraser.
9. exacto blade (scratching hair,fur and highlights)
10. Rubber mat from a draw. (Spray thru to make carbon fiber look)

And these are just a few you can use anything really just think outside the box and try a few crazy objects and see what YOU CAN FIND!:D:thumbsup::thumbsup:
 
I have seen net curtain used to get snake skin texture on a petrol tank, cotton wool, fishnet stockings or that type of material. If you can spray through it, it can be used.

Lee
 
Here's a small list of things I use for textures

1.erasers of all sizes and makes both pencils and square.
2 Dryer sheets
3. Electric eraser.
4. Onion sack, (makes great scale pattern for lures)
5.shower scruber.
6. Different types of netting.
7. A wadded up piece of plastic bag
8 5 mil fiberglass eraser.
9. exacto blade (scratching hair,fur and highlights)
10. Rubber mat from a draw. (Spray thru to make carbon fiber look)

And these are just a few you can use anything really just think outside the box and try a few crazy objects and see what YOU CAN FIND!:D:thumbsup::thumbsup:
This is a really good list thank you basepaint
Beginner-James
 
Hi James, this is an interesting topic. I've been experimenting with simple Kleenex tissue paper, which I scrunch up. I apply a short burst of white or dark spray on topic of a certain area, and then I use the scrunched tissue to dab away parts of the wet paint. It needs to be done quickly (within 10 seconds or so) before the layer dries.

See below an example of the outcome. I am still working on "industrializing" this effect, as it is quite labor-intensive. Also, the outcome is rather unpredictable and needs a lot of clean-up by painting over it afterwards. I've looked for a real old-school sponge, but couldn't get hold of such one... seems like all the stores sell these days are the scotch-brights.

file-34 - Copy.jpeg
 
I use pretty much anything I can find that will give me the effect I am looking for, I did this video for SiRoxx, Rick Martin , Jurien and anyone else who was interested in seeing it.
It is nothing special but you may find something useful into.
 
I have used scotch brite pads that I cut thin with an X-Acto knife. I also use the following: cotton batting, drywall tape, the mini fx stencils, Japanese lace paper, old brushes, guides I make by hand, torn paper, and I could keep going, but I think you get the point. And that is, when it comes to making textures, I find myself running to Home Depot before I run to the art store. LOL
 
Back
Top