Iwata sbs and badger cups

[huskystafford]

So Jurien72 and J000seph gave me nice idea to use badger bottom feed cups on my bcs. Cause of that I went to check few more stuff from badger. Can I/do they fit to sbs:
https://barwellbodyworks-shop.com/badger-100/781-50-048-18oz-color-cup-100-side-feed.html
They are dirt cheap compared to Iwatas, I could buy like 6 instead of one Iwata. Anybody maybe know?

 

[DaveG]

Side feed cups? No, the stems on the Badger cups are thinner than the Iwata counterparts - although I supposed you could put a turn of tape on the stem - used to do that WAY back in the day. Not so much now, though...

 

[huskystafford]

Side feed cups? No, the stems on the Badger cups are thinner than the Iwata counterparts - although I supposed you could put a turn of tape on the stem - used to do that WAY back in the day. Not so much now, though...

Thank you. I will try to find one other cheap solution then. Those Iwatas are a little expensive...

 

[JackEb]

mass confusion....
the thread title states SBS (side feed) your post mentions BCS (siphon feed) . . . .two different beasts

 

[huskystafford]

mass confusion....
the thread title states SBS (side feed) your post mentions BCS (siphon feed) . . . .two different beasts

I have both. Jurien and Joseph gave me idea for my bcs. To use badgers bottom feed cups. So this is solved. And now, I was thinking if I can do the same for my sbs with badgers side feed cups,cause they are so cheap.

 

[JackEb]

I have both. Jurien and Joseph gave me idea for my bcs. To use badgers bottom feed cups. So this is solved. And now, I was thinking if I can do the same for my sbs with badgers side feed cups,cause they are so cheap.

Aha! Confusion solved

 

[AndreZA]

For bottom feed Iwata does not make cups. It is either their bottles or cups from other manufacturers.
https://avwairbrushworks.wordpress.com/2017/01/13/harder-and-steenbeck-siphon-cup/

For side feed you can go to Aztek
https://avwairbrushworks.wordpress.com/2012/12/11/alternative-iwata-side-cups/

.

 

[huskystafford]

I guess my ass is covered with cheap cups

 

[Jurien72]

I'll have to ask @Rick Martin about this... he has a side feed Iwata that he got some cups for.

 

[Rick Martin]

I'll have to ask @Rick Martin about this... he has a side feed Iwata that he got some cups for.

I have aztek cups..they work good.

 

[huskystafford]

Thanks all for your help with this one. My airbrush will be grate full to all of you

 

[jord001]

Yeh Aztek cups for the SB, (testors brand in the states) They work great, I have an Aztek and so used the cups to try them.