Plotter Stand

I made me a cutting mat with 350micron mylar. I also use it for replacement cutting strips in my Cameo v.1. I originally bought it to make stencils but the Cameo can not cut through it, no matter how many double cuts I did. So I decided to make cutting surfaces out of it.

I can only manage to go through 190micron mylar if I do double and sometimes tripple cuts and the heaviest pressure. I only do very basic shapes like this. More technical designs I have laser cut.
I cut this one with cameo 3 and cb09 blade holder:
WP_20181204_003.jpg
 
I buy createx ones from local store. I made a deal with them if they wanna see my money.

I see:)

I also went to my old ones, brought to them autoblade and cb09, and my old man will make technical drawings of those blades for you. Probably you will get it tomorrow...

That's too much! If I'm not too late, ask not to make drawings. I need only one bottom diameter as I've shown. What for to do such amount of work?

I made me a cutting mat with 350micron mylar. I also use it for replacement cutting strips in my Cameo v.1. I originally bought it to make stencils but the Cameo can not cut through it, no matter how many double cuts I did. So I decided to make cutting surfaces out of it.

I can only manage to go through 190micron mylar if I do double and sometimes tripple cuts and the heaviest pressure. I only do very basic shapes like this. More technical designs I have laser cut.

What glue do you spray on the mylar?

There are other materials of the same thickness, but they're maybe cut easier than the mylar.
Try this one https://www.uscutter.com/GreenStar-...Non-Adhesive-Reusable-Material-Assorted-Sizes
@Russ Allen uses it, his feedback is on the seller's site (at the bottom of the feedback page). They sell it by the foot also. I've check up the thickness, it's 200 microns and it feels much softer than 200 microns mylar. The material looks like paper, only synthetic.
 
Basically I sad to them that I love supporting local stores with my money if they give me price good enough like their competition. That way I don't pay shipping costs, and I save 25 euros per order. 100 mylar sheets a3 if I remember costed me like 80 euros. Store owner was very understanding.
Local price per one sheet can be found here:
http://www.airbrush.si/sl/maskirni-filmi-in-folije/93-mylar-folija.html


That's too much! If I'm not too late, ask not to make drawings. I need only one bottom diameter as I've shown. What for to do such amount of work?
I will see. I just woke up, still in a process of finding my brains here, somewhere in my room -.-

What glue do you spray on the mylar?
https://www.barvezasitotisk.net/pripomocki/sprej-tack-max-za-fiksiranje-tiskanca-na-plosco

There are other materials of the same thickness, but they're maybe cut easier than the mylar.
Try this one https://www.uscutter.com/GreenStar-...Non-Adhesive-Reusable-Material-Assorted-Sizes
@Russ Allen uses it, his feedback is on the seller's site (at the bottom of the feedback page). They sell it by the foot also. I've check up the thickness, it's 200 microns and it feels much softer than 200 microns mylar. The material looks like paper, only synthetic.
Maybe one day I will try. I need to check if I can get this closer then from US.
 
Last edited:
Let's continue:)

While watching the videos on the plotters I saw one of the Silhouette models that can work only with tray. It cuts the materials only inside that tray.
Then another idea came. As inside that tray the material always remains flat it's good feature for precise cuts. So I started to think over how to use this feature in my plotter.

I came to this with my thoughts:

5.JPG
6.JPG 7.JPG

I'm satisfied with the result as the cutting mat slides just great and always remains flat.

Here's how the biggest Silhouette mat looks on the feed table. Actually, I've decided to make this size of the feed tables due to Silhouette cutting mat dimensions. I don't think I'll ever need to cut anything more longer than this size, I mean mylar type sheets, not the vinyl rolls.

8.JPG 9.JPG 10.JPG

One thing I think about now. How to glue the stainless steel sheets that top of the feed tables are made with to the tables' frames. One idea came was to use liquid nails maybe. I've glued smth with this outdoors and it works for decade already. So to give some scratching with P60(80) at the bottom of the sheets and glue to the bases would work, I think.
What would you suggest to me how to glue it and what would be better to use? I think that glue is pretty enough, as no loads are going to be applied to these stainless sheets, they only should stay in place.
 
Awesome work!

Such a stand would be ridiculously expensive to buy.

I think your liquid nails type glue would be fine.
Sikaflex is good but probably overkill.

There are lots of generic cb09 holders and all price levels of the blades for them....most are very good.

They are a whole world apart when upgrading from cameo type and much better than the plastic Roland type. Metal Roland is probably close but I still think the graphtec is better for the way the load is put on the blade inside the holder.
 
Last edited:
Vladimir, You will get your measurements tomorrow. Talked with my old man right now on a phone, and he sad to me I need to explain something in person.I will go to him tomorrow after the launch, when I will pick machine for drilling walls at his place.

But to be on topic, when I asked him yesterday to do the measurements, he asked me how much those blade holders cost. I told him like 10 bucks. He lol looked at me confused, and asked me why that guy wanna do his own holders if they are so cheap?
I started to laugh and told him: I don't know, maybe he's cheap bastard like I am lol

Little off topic. I watch a guy on you tube, which I love to watch, he relaxes me and I don't know why, but when ever I am reading your threads I always remember about that guy. Here it is :)
 
Vladimir, You will get your measurements tomorrow. Talked with my old man right now on a phone, and he sad to me I need to explain something in person.I will go to him tomorrow after the launch, when I will pick machine for drilling walls at his place.

But to be on topic, when I asked him yesterday to do the measurements, he asked me how much those blade holders cost. I told him like 10 bucks. He lol looked at me confused, and asked me why that guy wanna do his own holders if they are so cheap?
I started to laugh and told him: I don't know, maybe he's cheap bastard like I am lol

Little off topic. I watch a guy on you tube, which I love to watch, he relaxes me and I don't know why, but when ever I am reading your threads I always remember about that guy. Here it is :)
Lol ! When I was 19 I took some car rims and welded steel beams on them ... Cut up and going across the width so I have steel paddle wheels.
Worked great until I drove along ruts that had been made by a tractor, filled with water and froze over. My wheels went right through the 60mm ice and I was stuck until spring.
 
Lol ! When I was 19 I took some car rims and welded steel beams on them ... Cut up and going across the width so I have steel paddle wheels.
Worked great until I drove along ruts that had been made by a tractor, filled with water and froze over. My wheels went right through the 60mm ice and I was stuck until spring.
Projects like that and experiments are so crazy to me, I love them! That's the whole new level of adventure. :D
 
I've had a look at the machine. Cool tech characteristics it has!
Single path? 99 isn't grams I should think, just your machine settings?
I've bought only 60 degree blades only as I think that's what we need for the custom painting and ABing. 30 and 45 degree blades came with the plotter and I don't know when I'd use them.
I have different sheets, so I need to try them. For the shields you're going to use the thickest mylar, are you?
I've got some thoughts on making a set of the freehand shields. Do you have some similar plans and what kind (shapes) of the shields are you going to make?

Yes, I think 99 is just a setting on the cutter not pounds of pressure, and single path/single cut/1 pass, cuts through what thickness I have no problems. I've tried 125 micron and its ok but its a little too thin/flimsy, 190 micron is much better and is a reasonable thickness for shields, doesn't flop about so much. The 250 micron will be perfect if I can cut it. The 30 and 45 deg blades work fine but I found the 60 deg can cut a tighter line.
I have cut my own shapes in the 190 and also some commercial ones like the Fibonacci spiral, bird, pharaoh, "h" and some of the b-fast shapes.
I am planning on doing them again but this time smaller scale so I can use them on PP's and smaller paintings. I have most of the available stencils saved as files on my pc. Just cut them if and when I need one. I've also got several large and small true fire shields I brought from a guy on eBay called Deltaarts in Poland, they seem thicker than my 190 so I guess it could be 250 micron.

Lee
 
Such a stand would be ridiculously expensive to buy.

I wonder how much? You can calculate such a things:)


I think your liquid nails type glue would be fine.
Sikaflex is good but probably overkill.

Will search for you proposal.
OK, so it's going to be glued with that type.

There are lots of generic cb09 holders and all price levels of the blades for them....most are very good.

They are a whole world apart when upgrading from cameo type and much better than the plastic Roland type. Metal Roland is probably close but I still think the graphtec is better for the way the load is put on the blade inside the holder.

I have three types of Roland types of the holders and many dozens of the blades. It seems now that there's nothing to improve in the blades, but I'm not satisfied with the blade holders. Mine are good, their bodies are made with the plated aluminum. So I have plans to make more prices one. Need to buy some special tools I don't have, I mean diameters I don't have, the tools I do have.
As I've already said, I'll think over making smth to the plotter carriage to increase precision, besides the blade holders. You may say what am I going to do with one of the best inexpensive machines, but I am what I am;) I see that some thing can be better.

Vladimir, You will get your measurements tomorrow. Talked with my old man right now on a phone, and he sad to me I need to explain something in person.I will go to him tomorrow after the launch, when I will pick machine for drilling walls at his place.

I'm not in a hurry at all. Thanx!

But to be on topic, when I asked him yesterday to do the measurements, he asked me how much those blade holders cost. I told him like 10 bucks. He lol looked at me confused, and asked me why that guy wanna do his own holders if they are so cheap?
I started to laugh and told him: I don't know, maybe he's cheap bastard like I am lol

And you the cheap bastard? I've bought mine good quality for 7 bucks each and I know where to have them (identical to what I have) at 4, I just didn't want to pay 40 bucks for 10 blade holders:D You cheap bastard!;)

The question is to make precise holder, more precise that I have. Maybe the one I have are great, but they can be better. Time will show waht I'll come up with.
From my test cuts of the vinyl I'm satisfied with the outcome, but the best is the enemy of good!:)

I'll behave now Vladimir, I just love this channel -.-

Great channel!:thumbsup::D

You know guys, any man is a bit that Russian inside, especially you @huskystafford if you have Slavic nationality;)
If I'd tell the story how in my childhood I was trying to make the rocket... When I was trying to launch it I almost sh@it my pants, but if I'd continue my story you'd wet yours, besides you'd fill your rooms with the tears from laughing adding some hitting your keyboards with your heads:D I'll spare your keyboards.
So I mean, I like the channel much!lol

Lol ! When I was 19 I took some car rims and welded steel beams on them ... Cut up and going across the width so I have steel paddle wheels.
Worked great until I drove along ruts that had been made by a tractor, filled with water and froze over. My wheels went right through the 60mm ice and I was stuck until spring.

Cool!
If I'd have the tools in that age of yours, you'd see my stuff, if I'd be alive now after my experiments:) I once get to the hospital for over a week after experimenting with some little home made bomblol

Yes, I think 99 is just a setting on the cutter not pounds of pressure, and single path/single cut/1 pass, cuts through what thickness I have no problems. I've tried 125 micron and its ok but its a little too thin/flimsy, 190 micron is much better and is a reasonable thickness for shields, doesn't flop about so much. The 250 micron will be perfect if I can cut it. The 30 and 45 deg blades work fine but I found the 60 deg can cut a tighter line.
I have cut my own shapes in the 190 and also some commercial ones like the Fibonacci spiral, bird, pharaoh, "h" and some of the b-fast shapes.
I am planning on doing them again but this time smaller scale so I can use them on PP's and smaller paintings. I have most of the available stencils saved as files on my pc. Just cut them if and when I need one. I've also got several large and small true fire shields I brought from a guy on eBay called Deltaarts in Poland, they seem thicker than my 190 so I guess it could be 250 micron.

Lee

It's bad when the manufacturers make different setting to the tools, we can't know that exact pressure we do to the blade holders. Mine have grams of down pressure.

Thought I haven't tried 120 micron at work, but I totally agree with you, it's no good for the any relatively bigger shields. As I've said, it may be good for curved surfaces like tanks, etc. This thickness feels almost like random office paper. In some cases it's great.

Your down pressure is the beast! You will definitely cut in double, triple cut, I think.

I also have cut the shield you've mentioned, but with an e-acto:) I did not have even the plans to have the plotter then.

BTW, what program do you make your vector graphics in for the shields?


this was done with cb09 holder and those graphtec blades on that mylar which I posted before:


OMG!:) If your Cameo can do this, than what my beast with the servo motors could do?
BTW, I'll show you what I've done without the plotter similar to this stencil of yours just to remind you of the channel you've mentioned!:D

I need to glue my feed tables as fast as I can to try my stuff! Men, you're inspiring me!:thumbsup:
 
Last edited:
nož=knife
srebrni=silver
bel=white
mere/mera=measurements

I can translate from Slovenian into Russian;)

nož = нож
srebni = серебрянный (Rus) = срібний (Ukr)
bel = белый
mera = мера

Not a big difference?:D Only in Cyrillic. I think we could understand each other without any dictionary.

Thanx for the measurements, regards to your old man!
Will keep in mind the sizes when thinking over my custom blade holder.
 
I can translate from Slovenian into Russian;)

nož = нож
srebni = серебрянный (Rus) = срібний (Ukr)
bel = белый
mera = мера

Not a big difference?:D Only in Cyrillic. I think we could understand each other without any dictionary.

Thanx for the measurements, regards to your old man!
Will keep in mind the sizes when thinking over my custom blade holder.
np,enjoy in your adventure.
 
View attachment 57306

It'd be a whole lot cooler if it was.

Surprisingly I couldn't find one that actually corresponds to that phrase.
amateur :D



giphy.gif
 
Back
Top