Plotter Stand

amateur :D



giphy.gif
off topic vladimir sry :D
I was looking under the name of the movie to find this.

another off topic lol We manage to fix my lights, we also put 2 chains, one is for hair drier which I use somethimes, so bassicaly now hang in the air and we put one chains so hose from airbrush goes true and it hangs in the air, so I don't trip over it. Total cost 135 euros.

Great day today :)
 
another off topic lol We manage to fix my lights, we also put 2 chains, one is for hair drier which I use somethimes, so bassicaly now hang in the air and we put one chains so hose from airbrush goes true and it hangs in the air, so I don't trip over it. Total cost 135 euros.

If you will type such things again, you've got the risk to screw up my brain!:D
It's better to see photos, as my imagination can't draw the picture of what you've described:eek: As after you've shown certain channel I can't think seriously about the thingslol

Great day today :)

Yeah, the day's great! I'm working on the prototypes;) Don't ask me of what!:p
 
If you will type such things again, you've got the risk to screw up my brain!:D
It's better to see photos, as my imagination can't draw the picture of what you've described:eek: As after you've shown certain channel I can't think seriously about the thingslol
Damn you Vladimir, we made total mess drilling those walls, I am still cleaning :D

Here it is, I tried to make pictures, so you guys can't see what kinda mess we made drilling lol

I didn't get curved rails, so I need to find someone to make me one of those, until then, this will be good.

WP_20181206_007.jpg WP_20181206_006.jpg WP_20181206_005.jpg WP_20181206_004.jpg
 
How do you like the light?
Or has it been on?
It wasn't on when I made pictures. I love the light. We tried it when we were preparing for drilling. So we see where light will fall on easel.This was very good investment for me. I was scared I will screw up going with 2x58, but I didn't. 2x58 is perfect. I am so happy today, really am. It's kinda funny. Even those chains for my air hose and air drier are so cool, I love it. We also drilled at the top of my table so I can reposition lights in a second.

I will order 4 spare tubes very soon, just in case. I waited for these like 10 days or more for friking sake. To bad I didn't go with these on start, cause I wasted the same amount of money on other lights.

one more thing. When I go close to the easel with my hands, there is no shadow, cause that light is so width... 1.5 meters.
 
Last edited:
It wasn't on when I made pictures. I love the light. We tried it when we were preparing for drilling. So we see where light will fall on easel.This was very good investment for me. I was scared I will screw up going with 2x58, but I didn't. 2x58 is perfect. I am so happy today, really am. It's kinda funny. Even those chains for my air hose and air drier are so cool, I love it. We also drilled at the top of my table so I can reposition lights in a second.

I will order 4 spare tubes very soon, just in case. I waited for these like 10 days or more for friking sake. To bad I didn't go with these on start, cause I wasted the same amount of money on other lights.

one more thing. When I go close to the easel with my hands, there is no shadow, cause that light is so width... 1.5 meters.
What other lights?
I know we talked about this but u can't remember the specifics, other than I think I talked you out of that table lamp thingy.
 
What other lights?
I know we talked about this but u can't remember the specifics, other than I think I talked you out of that table lamp thingy.
WP_20181206_008.jpg
4x of those lights + bunch of different bulbs and never was good enough. The end result is 4 of those were like 110 euros if I remember , and there is money on bulbs. So I wasted the same amount of money which I spend for color matching light+tubes+chains+all the other stuff which I needed for mounting to the wall...

This was happening before I asked first question about lights on this forum if I remember correctly...

Now I need to fix all the crap we made with drilling lol
 
Last edited:
forgot to mention. We slowly started with my compressor sound isolation. First step is made. Doors of the room for the compressor. When I will finish with all of the stuff, this thing will be bulletproof silent lol
This was done yesterday.


WP_20181206_009.jpg
 
Damn you Vladimir, we made total mess drilling those walls, I am still cleaning :D

Here it is, I tried to make pictures, so you guys can't see what kinda mess we made drilling lol

You can ask someone to hold the hoover intake tube right at the place where you're drilling, so you wouldn't have a mess;)

Even those chains for my air hose and air drier are so cool, I love it.

You've made overload to those chains with the dryer and the hose, be careful!:D
 
Damn you Vladimir, we made total mess drilling those walls, I am still cleaning :D

Here it is, I tried to make pictures, so you guys can't see what kinda mess we made drilling lol

I didn't get curved rails, so I need to find someone to make me one of those, until then, this will be good.

View attachment 57311 View attachment 57313 View attachment 57312 View attachment 57314
Looks like the A Team have been at work lol. Excellent job Husky!


Sent from my iPhone using Tapatalk
 
Back
Top