WANTED WOLD MASTER M TIP NEEDED OR THREAD

Lotus

Young Tutorling
Does anyone know the thread pitch on the Wold master M material tip? I could also use a Masters M fluid/air cap assy. Please let me know. Thanks
 
Last edited by a moderator:
76D29BE6-B2B6-417C-9257-D194AE83EB90.jpeg
you will find that making an introduction so folks know where you are in the world may aid you in finding what you want .
Also all caps is shouting and no reason for shouting .

Also this is the second time I have asked for an introduction , I strongly suggest making one if you like being apart of this forum ,
 
Larry, shoot me a pict of the pieces you are looking for, and I will try to get the measurements for you.
The broken one actually twisted off and I was able to get it out with a ez out. I have a couple of spares but the thread is way to tight, if not impossible to thread. I have been able to lap one tip into the brush but it's an odd on and so I would love to get a nice matched set maybe with two style tips. I know you do machining so maybe you know the thread on the little puppy. Any help would be greatly appreciated. I took so long to reply because I didn't realize iI had a reply. Regards, Larry
 
View attachment 61945
you will find that making an introduction so folks know where you are in the world may aid you in finding what you want .
Also all caps is shouting and no reason for shouting .

Also this is the second time I have asked for an introduction , I strongly suggest making one if you like being apart of this forum ,
Where do I find the introduction area?
 
Back
Top