A new or tuned Cm / sb ??

erwin de pan

erwin de pan

Mac-Valve Maestro!
A new or tuned Cm / sb ??
The first time I came across this airbrush was at the F.B of Marissa.
The 2nd time was with Gerald Mendez.
They don't want ,or can't say anything about it.
Only that the control has improved.
It looks promising. It could be a new K33 or something from iwatta itself.
Airbrush prototype.JPG Prototype.JPG
 
Marissa never showed a brush to speculate about, while there is nothing visibly different about Gerald's CM-SB... I would venture a guess at either a new needle/nozzle/nozzle cap combo for the micron series, or in Gerald's case i would not rule out a new paint, or reducer...
 
In Marissa's case it maybe something Eddy is working on being she does say it is a prototype airbrush that may never go into mass production.
While Gerald kind of shows it is an sb model of some kind.
Kind of like how many licks does it take to get to the center of a tootsie pop the world may never know unless it actually goes into production.
 
What's shown on the photo does not look like smth revolutionaryo_O
As Dave already said, "either a new needle/nozzle/nozzle cap combo for the micron series", it's not possible to say more just looking at the photo.

OK! Withing some days I'll take some pictures and will show smth new;) In reality I already have the results for some time, but haven't had any time to take some photos, too busy... Now this thread says that the time has come to find some time to switch on the camera:)
 
Mr.Micron said:
In Marissa's case it maybe something Eddy is working on being she does say it is a prototype airbrush that may never go into mass production.
While Gerald kind of shows it is an sb model of some kind.
Kind of like how many licks does it take to get to the center of a tootsie pop the world may never know unless it actually goes into production.
Click to expand...
Eddy never worked on a micron Zsolt did all the work and he is declared bankrupt ages ago , I have seen the prototype airbrush Marissa talks about and it is based on the CM SB
 
It’ll be interesting to see what it ends up being.


Sent from my iPhone using Tapatalk
 
I remember reading some stuff about a 0.1 micron several years ago on an old forum I frequented. I think it was 2012 same year I did the Marissa portrait course. The K33 came after that but we never heard about the super micron again as far as I lnow. Maybe it's something down the same line??

Lee
 
I can't remember the first time I seen the supposed release of some sort of "super" micron, but it's been brought up for at least a decade or more. Nothing ever materialized even though it would pop up now and then from different people. Promises and hopes.
I guess the K33 is closest thing, but I have a hard time believing the current .18 Microns are holding people back and if they could only get their hands on the .12 adamantium edition they would be airbrushing superstars.
 
From the pics, looks like the only new items are probably the needle and fluid nozzle. As stated earlier, an improved Micron will not make you a better painter, it's either in you or it 'aint. That's all there is to it. A standard Micron with V2 parts is a pretty nice combination and sufficient for anyone's needs, unless you want to paint on the head of a pin!
Regards,
Chris the cabbie
 
You must log in or register to reply here.

Similar threads

Ronald art
Iwata CM SB v1
Replies
6
Views
367
JB Test
JB Test
L
New H&S Evo 2024 incoming
Replies
12
Views
320
AlaskaJason
AlaskaJason
Wizard_Theron
Iwatas are really very good aren’t they
Replies
13
Views
373
Kingpin
Kingpin
TruggyDriver69
I’m getting a new Iwata but….
Replies
12
Views
250
TruggyDriver69
TruggyDriver69
erwin de pan
My first impression of the Takumi micron.
Replies
7
Views
1K
musicmacd
musicmacd
Back
Top