If you don’t answer the questions then it’s going to be impossible to help you, and we are trying to help you !I have stripped it down 50 times a day still no good
If you don’t answer the questions then it’s going to be impossible to help you, and we are trying to help you !
Telling us you stripped it down 50 times a day and now it won’t spray isn’t at all helpful.
Will it spray water
Is it ‘spraying’ air
Have you got the needle all the way forward (don’t force it) and the needle chuck tightened
What PSI are you spraying at ?
How did you clean it?
Did you soak it in anything ?
If you use the Createx Restorer and soaked the entire brush in it all the seal are swollen and will more then likely have to be replaced.
You may have also messed up the o-ring on the nozzle cap which is allowing it to suck air and not spray right. a little bees wax or chap stick on the threads will fix that.
what paint were you using
How did you tighten everything up - with fingers or spanners.
where do you live in Australia we may have someone nearby that may be able help depending on your Covid situation