Separate names with a comma.
Want to see more forum, less google ads ? Then register for free
I think you are suppose to adjust the pressure at the bottom of the water trap. It is not as much a regulator as a bleed valve. It bleeds out the...
This is what I want to know.
Don't keep us hanging, what else did you get.
Such good info from @DaveG. The only person I trust these days to give feedback on compatibility issues.
EFX can definitely not be used on textile that will be washed or even get wet.
Is spraying cleaner enough? I take mine off often. That is what I like about it is you can get to the nozzle without taking off the nozzle.
When I did not have the space I have now, and the amount of airbrush I have now, I use to pack them away in a cheap case....
I've got one of these and the fine refills are too soft for airbrush work. For graphite work it is awesome.
Practice on what you want to paint. If you practice on paper and want to do metal, you will need to adapt again. If you want to do the scratch and...
I saw on a Mike Learn FB post, the Mojo is returning. https://mikelearn.com/richpen-airbrush/
It depends on the brand of paint. I always find black to be a bit on the brown side when thinning. That is why I started using Payne's Grey to get a...
Sorry, I did not see that was a link. but yes, the would obviously fit. You can also use the Aztek cups and bottles....
Not the ones I got. Scroll down in my review. https://avwairbrushworks.wordpress.com/2016/09/19/olympos-hp-100sb/
The cups from my HP-100SB works perfectly with my Micron. Excactly the same design, finish is just not as good as Iwata.
Are you sure it's contact paper and not clear frisket or masking film? Even the stuff that's made for that that, can cause problems. Surface must be...
I've used them through ebay long before they were as big as they are now and even then I got great service.
Metal reflects and the sharper the reflection, the shinier it will look. Chrome has sharp and clear line, aluminium or dulled metals has a duller...
Maybe you can flip the gauge over to the other side if you need to for space restraints or something.
I've never replaced a nozzle on any of mine. A couple of needles because they are soft. But have now over over to the new v2 needles and nothing...
The only way that design work is if the one side is blocked. As soon as there there is a leak in the vacuum, it will not suck paint. So if one cup...