Ronald art
Air-Valve Autobot!
the private stock version cant be erased it is mend for T shirts and hard surfaces
Clayboad problem
- Thread starter beginner-James
- Start date
beginner-James
Mac-Valve Maestro!
What about Createx illustration i think it has multiple hardening stages?
Beginner-James
Beginner-James
Robbyrockett2
Air-Valve Autobot!
Its ok for about 24 hours
After that it still erases but it's more patchy, less soft
What do you need to soften the paint for...? The problem is as much that you have only one layer... you will still go down to the base clayboard. you can try reapplying water over the top. I did a picture of Einstein on clayboard, went too dark in the face, removed the whole lot and re started.
beginner-James
Mac-Valve Maestro!
Mark We have our wires crossed somewhere along the away It's not one coat but more like 4-5 I was just about ready to add my last coat in that area but was going to lightly add more depth too my fur but it was going back to white as soon as I started to erase with eraser and fibre pen aaaaaaaaaaaaaaaaaaaaah
James
James
Tuffnutz
Detail Decepticon!
Tuffnutz
Detail Decepticon!
So it ended up as Einstone
Airbrush Dreams
Air-Valve Autobot!
There are two things to take into consideration. Golden High flow is not made for erasing or even as a airbrush paint any more. It is made for drip painting. Adding airbrushing Medium will help but once it is cured it will scratch completely off. Two is if the Claybord has a higher concentration of glue in it the paint will sit on top just like Synthetic Paper and not penetrate into the clay base. Having the paint absorbed will allow for a more subtle erasing.
Sent from my iPhone using Tapatalk
http://fredaw61.wixsite.com/the-artist
https://www.youtube.com/user/fredaw61
Sent from my iPhone using Tapatalk
http://fredaw61.wixsite.com/the-artist
https://www.youtube.com/user/fredaw61
