C
Ctaycray
Guest
Hi, I was wondrtwow if I can connect an iwata moisture trap and a MAC valve to my airbrush at the same time? So it would be hose - moisture trap - Mac valve - airbrush. Any input would be greatly appreciated!
AndreZA
Air-Valve Autobot!
Yes you can. In the image below I did not use Iwata bits but they are the same.
The reason why I chose the one configuration better than the other is because if the moisture trap is between the regulator and MAC valve, pressure builds up in it and the first press of the trigger releases the build up pressure first before it settles to the pressure you set with the MAC valve. And that way you will need a filter for each of your guns and when storing the gun it takes up much more space. But on the other hand, it give it a nice beefier grip.
The reason why I chose the one configuration better than the other is because if the moisture trap is between the regulator and MAC valve, pressure builds up in it and the first press of the trigger releases the build up pressure first before it settles to the pressure you set with the MAC valve. And that way you will need a filter for each of your guns and when storing the gun it takes up much more space. But on the other hand, it give it a nice beefier grip.
