T
tontmcgrath
Guest
anybody using one of these airbrushes i have bought one i find that they AR very good they pull a very thin line even when the paint is not reduced tony
anybody using one of these airbrushes i have bought one i find that they AR very good they pull a very thin line even when the paint is not reduced tony
I've one and it works fine, but got a few nozzle that don't work at all!! As @DaveG said it's a matter of luck!! I let the 0,66 nozzle in it with the fan and use it for big coverages only!!
Enviado desde mi iPad utilizando Tapatalk
I have one and have the #1 (fine) and #2 (medium) setups. #1 will not work and when it does its hit and miss. The #2 setup works great and i've had no issues with it. I did my Cameron Diaz, a bird and another portrait with it no problem. Lots of folks have had issues but I think i have a good one.
I got it with the #2 setup but brought and swapped it to the #1 so it would be similar to the Mojo III as I have a mojo II and desperately wanted the Mojo III but i soon swapped back to the #2 setup when the fine setup proved too finiky. Plus i could get nice fine lines with the medium setup. They are built well so cleaning is pretty easy. So if it works then leave it working and try not to mess with the setup.
I almost brought a mojo III but tried my mates one and didn't like it. Sounds like you have a good one. Look after it and be careful of the needle they are famous for bending for no reason. I know mike sourced some stronger needles but not sure if you have one of those.
I love the mojo II. Mike learn's airbrush forum was the first one I ever went on and spent many years there. That's how I got my mojo II. Rod Fuchs sent me one of his personal airbrushes as I was using an old Aztec 3000 and it changed everything. So naturally when M3 came out I wanted one but I think paasche let the side down a bit. Good luck with it anyway. You should be ok.
Lee
I almost brought a mojo III but tried my mates one and didn't like it. Sounds like you have a good one. Look after it and be careful of the needle they are famous for bending for no reason. I know mike sourced some stronger needles but not sure if you have one of those.
I love the mojo II. Mike learn's airbrush forum was the first one I ever went on and spent many years there. That's how I got my mojo II. Rod Fuchs sent me one of his personal airbrushes as I was using an old Aztec 3000 and it changed everything. So naturally when M3 came out I wanted one but I think paasche let the side down a bit. Good luck with it anyway. You should be ok.
Lee
I had 2 needles in the box and one was polished but the other looked to be stock and unpolished. I still have the unpolished in the brush and have no complaints on the spraying ability at all. I will probably try the polished needle out soon to see if there is an appreciable difference. I would like to get the grip slide on for the Mojo 3 but doubt they are still available at this time and am not on Facebook to try to get Mike Learns attention to find out if there is any remaining stock(Facebook id was hacked awhile back and no support to rectify it either!), oh well.
Regards,
Chris the cabbie
I msg'd Mike on Facebook and he said he doesnt have any however he said he would have a look to see if he has one hiding somewhere.
Ok just been and checked, my #2 setup 0.38 has 2 ridges around the cap, the nozzle has 2 ridges too and theres also 2 ridges at the end of the needle. The #1 has only 1 ridge on each.
I'll give mine a look over tonight and see but the spare needle does say it's a super fine needle. I wonder if that means it's one of the last super fine conversions that are on the site you linked to earlier?
Regards,
Chris the cabbie
We use essential cookies to make this site work, and optional cookies to enhance your experience.